Monster "MAX" 13.5T ROAR Spec Brushless Motor

Monster "MAX" 13.5T ROAR Spec Brushless Motor

Trinity Price: $99.99
You Save:$40.00(29%)
In Stock
Part #:TEP1505-P

  • Performance SPEC Motor:Tuning Option Services available in the drop down menu.
  • Certified Team SPEC Motors:Are a Performance Tuning Option custom built to order, please allow 1-2 days build time before shipment.

Choose Options

Tuning Option Service help

Monster MAX ROAR Spec 13.5t Brushless Motor

ROAR | Approved

Standard Race SPEC Features:

  • Newly Designed Low Resistance Stator
  • Red Insulators Removed for less resistance and increase air flow 
  • Black Thermal Epoxy for better heat dissipation leading to "no fade"
  • TEP1119 High Torque Rotor

Designed for all out power and speed needed for Extreme On-Road and Off-Road Racing, Pan Cars, Touring Cars and 1/10 Off-Road Buggies

  • Monster Horsepower Series is all new!
  • Aluminum based sensor board for true sensor alignment
  • Infinite Timing Adjustment
  • 2mm Copper Tabs
  • Thicker Pure Copper Solder Tabs and Collector
  • Thermal Stator Coating for the best heat dissipation possible
  • Turbine style vented nose
  • More Vents for More Cooling
  • New 220C wire coating
  • Certified Gauge High Temperature Wire
  • New Short Stack Stator Design
  • New Stator Material
  • Grade 5 Ball Bearings
  • Uses all D3.5, D4  and 24K Rotors
  • 2650Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. 

(Tuning Option Service +$15.00)

  • Production motor
  • Thorough visual inspection for any issues including timing, shimming and loose screws
  • Each and every production motor Stator is tested and only the TOP 5% are labeled as Team SPEC 5%

(Tuning Option Service +$65.00)

  • Custom built and hand assembled just like our Team Driver Motors
  • Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from "0" to "30 plus". Certified Plus will have no higher than a "4" so you never see a rotor higher than a "4" in the "PLUS" line.
  • The other advantage will be each and every CERTIFIED Team SPEC 5% (Plus) motor will come with a complete print-out  after running the motor on the Motolyser.
  • Ceramic Red-Sealed Bearings installed (Front and Rear)
  • Rotor shimmed for alignment
  • Sensor Board adjustment and timing set based on the application
  • CERTIFIED Team SPEC 5% (Plus) Rotor and Stator 

Certified Motors will come Tuned with timing set for your particular scale of racing and the listed Rotor Installed

TEP1505X1 1 Cell On-Road 
  • 12.5 x 25.5mm Long
  • TEP1119 High Torque Rotor - Copper
TEP1505X2  2 Cell Touring Car 
  • 12.5 x 25.5mm Long
  • TEP1119 High Torque Rotor - Copper
TEP1505XO  2 Cell Off-Road Torque (Ideal for 1/10 4wd Buggy and Truck)
  • 12.5 x 25.5mm Long
  • TEP1119 High Torque Rotor - Copper

* MAX Voltage 11.1v 3Cell Lipo Battery

** Any testing numbers shown are for photo purposes only. Actual numbers vary by turn and actual motor itself.

5 Stars
13.5 team spec
If i could give this motor 10 stars I would worth the money hands down .... After running there 17.5 in my buggy I picked up a 13.5 for my stadium and was going to run my old 13.5 (different brand) my 4x4 buggy and I can't even run it because it don't even meet my expectations.. from here on out it's MONSTER MAX or nothing ......and the customer support with Trinity is top notch never an issue I'd buy this motor and Trinity products over and over again
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from Hesperia CA. on 2/28/2018
5 Stars
Monster max
Really fast motor
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from Tennessee. on 2/13/2018
5 Stars
Great motor way more motor than my driving abilities are capable of handling.
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from LEXINGTON, SC. on 1/3/2018


Ultimate PTFE & Aluminum Brushless Motor Shim Kit (28pc)
Back In Stock Soon!
Aluminum Stator Screws Non-Magnetic 48mm (3) (Silver)
Average Rating(2)
In Stock
Certified Red Seal Ceramic Motor Bearings (2)
Average Rating(2)
In Stock

Related Items

Recently Viewed Items