Monster "MAX" 17.5T Spec Brushless Motor

Monster "MAX" 17.5T Spec Brushless Motor

Trinity Price: $99.99
You Save:$40.00(29%)
Part #:TEP1506-P

  • Performance SPEC Motor:Tuning Option Services available in the drop down menu
  • Certified Team SPEC Motors:Are a Performance Tuning Option custom built to order please allow 1-2 days build time before shipment.

Choose Options

Tuning Option Service help

Monster MAX Spec 17.5t Brushless Motor

ROAR | Not Approved 

Standard Race SPEC Features:

  • Newly Designed Low Resistance Stator
  • Red Insulators Removed for less resistance and increase air flow 
  • Black Thermal Epoxy for better heat dissipation leading to "no fade"
  • TEP1119 High Torque Rotor

Designed for all out power and speed needed for Extreme On-Road and Off-Road Racing, Pan Cars, Touring Cars and 1/10 Off-Road Buggies

  • Monster Horsepower Series is all new!
  • Aluminum based sensor board for true sensor alignment
  • Infinite Timing Adjustment
  • 2mm Copper Tabs
  • Thicker Pure Copper Solder Tabs and Collector
  • Thermal Stator Coating for the best heat dissipation possible
  • Turbine style vented nose
  • More Vents for More Cooling
  • New 220C wire coating
  • Certified Gauge High Temperature Wire
  • New Short Stack Stator Design
  • New Stator Material
  • Grade 5 Ball Bearings
  • Uses all D3.5, D4  and 24K Rotors
  • 2100Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. 

(Tuning Option Service +$15.00)

  • Production motor
  • Thorough visual inspection for any issues including timing, shimming and loose screws
  • Each and every production motor Stator is tested and only the TOP 5% are labeled as Team SPEC 5%

(Tuning Option Service +$65.00)

  • Custom built and hand assembled just like our Team Driver Motors
  • Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from "0" to "30 plus". Certified Plus will have no higher than a "4" so you never see a rotor higher than a "4" in the "PLUS" line.
  • The other advantage will be each and every CERTIFIED Team SPEC 5% (Plus) motor will come with a complete print-out  after running the motor on the Motolyser.
  • Ceramic Red-Sealed Bearings installed (Front and Rear)
  • Rotor shimmed for alignment
  • Sensor Board adjustment and timing set
  • CERTIFIED Team SPEC 5% (Plus) Rotor and Stator 

Certified Motors will come Tuned with timing set for your particular scale of racing and the listed Rotor Installed

TEP1506X1 1 Cell On-Road 
  • 12.5mm
  • TEP1112 High Torque Rotor - Turquoise
TEP1506X2  2 Cell Touring Car 
  • 12.5 x 25.5mm Long
  • TEP1119 High Torque Rotor - Copper
TEP1506XOB  2 Cell Off-Road RPM
  • 12.3 x 25.5mm Long
  • TEP1118 RPM Rotor - Black
TEP1506XOT 2 Cell Off-Road Torque
  • 12.5 x 25.5mm Long
  • TEP1119 High Torque Rotor - Copper

* MAX Voltage 11.1v 3Cell Lipo Battery

** Any testing numbers shown are for photo purposes only. Actual numbers vary by turn and actual motor itself.

5 Stars
Monster 17.5
I have raced a lot of motors in the past, but my Trinity Monster 17.5 is just amazing.
Did you find this helpful?  5 of 6 Found Helpful
Reviewed by: (Verified Buyer)  from Rocky Hill, CT. on 3/1/2018
5 Stars
Fastest 17.5 motors made. Awesome quality, runs cool, zero fade!
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from Raleigh, NC. on 4/23/2018
5 Stars
Crazy fast
Did you find this helpful?  4 of 7 Found Helpful
Reviewed by: (Verified Buyer)  from Tennessee. on 10/4/2017


Aluminum Stator Screws Non-Magnetic 48mm (3) (Silver)
Average Rating(2)
In Stock
Certified Red Seal Ceramic Motor Bearings (2)
Average Rating(2)
In Stock

Related Items

Recently Viewed Items