X-Factor 13.5T SPEC Class Brushless Motor

X-Factor 13.5T SPEC Class Brushless Motor

review
5
0
5
Trinity Price: $99.99
MSRP:$149.99
You Save:$50.00(33%)
In Stock
Part #:REV1101-P
UPC:

  • "Performance SPEC Motor":Tuning Option Services available in the drop down menu.
  • Certified Plus SPEC Motors:Are a Performance Tuning Option custom built to order, please allow 1-2 days build time before shipment.

Choose Options

Tuning Option Service help
APPROVED...

X-Factor 13.5T SPEC Class Brushless Motor

REVTECH... POWER Yourself to the NEXT Level

Standard Race SPEC Features:
  • 10% Lighter than Previous Motors
  • Weight (144g avg)
  • New Composite Sensor Board
  • 0 - 60 Degrees of Timing adjustment
  • Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws (no long screws)
  • X-Flow Cooling which pulls more air through the can, reducing motor temps
  • 2pc CNC Machined Aluminum can allows for more accurate deviation readings
  • 2mm Ultra Low Resistance Solder Tabs
  • New Stator Design provides a more efficient power curve NO FADE!
  • 2650Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.
13.5T comes built stock with the torque and punch of the TEP1119
  • 12.5 x 25.5mm Long
  • High Torque Rotor - Copper

Team SPEC FEATURES:
(Tuning Option Service +$15.00)

  • Production Base Motor
  • Thorough visual inspection for any issues including timing, shimming and loose screws
  • Each and every production Motor Stator is tested and only the TOP 5% are labeled as Team SPEC 5%
  • Stator Resistance Numbers are Marked on the Inside of the box then then box is Sealed with a Special Team SPEC Label.

CERTIFIED Plus SPEC FEATURES:
(Tuning Option Service +$65.00)

  • Custom built and hand assembled just like our Team Driver Motors
  • Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from "0" to "30 plus". Certified Plus will have no higher than a "4" so you never see a rotor higher than a "4" in the "PLUS" line.
  • The other advantage will be each and every CERTIFIED Plus SPEC motor will come with a complete print-out after running the motor on the Motolyser.
  • Rotor precision shimmed and aligned
  • Sensor Board adjustment and timing set for motor application
  • Each Motor with come Built with a CERTIFIED Top 5% Rotor and Stator

Certified Plus SPEC Featured Upgrades:

  • Certified Red Seal Ceramic Bearings (TEP1738 Installed)
  • Special Certified Black Anodized End Plate (Only Available with a Certified Motor)
  • Complete 6pc Silver Aluminum Screw Kit (REV1131 Installed)
  • Revtech Blue Chrome Motor Box
  • Top 5% Stator and Rotor

All Certified Plus SPEC Versions are Built with a TOP 5% Rotor and Tuned to your selected application.
  • 12.5 x 25.5mm Long
  • High Torque Rotor - Copper

5 Stars
racer
was not happy with the numbers on motor they were average when i paid for5% motor. no rotor numbers. may as well have purchased a stock motor. **Trinity's Comment | Team SPEC Motors are Testing and and marked with the resistance number based on the the best of each batch that comes in, so the numbers are going to very slightly from batch to batch. We are not testing rotor Gauss strength not possible to on production motors that is reserved for the custom Certified motors**
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Crimora. on 5/5/2019
5

Related Items

Recently Viewed Items