Home > MOTORS > X-Factor > X-Factor Certified Plus > X-Factor 17.5T Certified Plus SPEC Off-Road Torque

X-Factor 17.5T Certified Plus SPEC Off-Road Torque

Trinity Price: $164.99

Back In Stock Soon!

Part #:REV1102XOT

005

APPROVED...

REVTECH... POWER Yourself to the NEXT Level

Standard Race SPEC Features:

10% Lighter than Previous Motors
Weight (144g avg)
New Composite Sensor Board
0 - 60 Degrees of Timing adjustment
Revolutionary timing ring & locking end plate systems saves weight Only 6 short screws (no long screws)
X-Flow Cooling which pulls more air through the can, reducing motor temps
2pc CNC Machined Aluminum can allows for more accurate deviation readings
2mm Ultra Low Resistance Solder Tabs
New Stator Design provides a more efficient power curve NO FADE!
2100Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number.

17.5T comes built stock with the torque and punch of the TEP1119

CERTIFIED Plus SPEC FEATURES:

(Tuning Service)

Custom built and hand assembled just like our Team Driver Motors
Buying a Certified Motor is the closest anyone can get to buying a Trinity Team Motor. Example: Asymmetry in a brushless motor could be anywhere from "0" to "30 plus". Certified Plus will have no higher than a "4" so you never see a rotor higher than a "4" in the "PLUS" line.
The other advantage will be each and every CERTIFIED Plus SPEC motor will come with a complete print-out after running the motor on the Motolyser.
Rotor precision shimmed and aligned
Sensor Board adjustment and timing set for motor application
Each Motor with come Built with a CERTIFIED Top 5% Rotor and Stator

Certified Plus SPEC Featured Upgrades:

Super Sonic Ceramic Bearings (TEP3199 Installed)
Special Certified Black Anodized End Plate (Only Available with a Certified Motor)
Complete 6pc Silver Aluminum Screw Kit (REV1131 Installed)
Top 5% Stator and Rotor

All Certified Plus SPEC Versions are Built with a TOP 5% Rotor and Tuned to your selected application.

Disclaimer:

To Comply with BRCA Rules all motors must be assembled with the following production parts.

Rev1122- X-factor Blue Endbell with Bearing

Rev1400- Standard Bearings

Rev1130- Standard Steel Screws

Hot motor

This is a really strong motor. I have to adapt to all the power like almost like changing from stock to mod!

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: (Verified Buyer) Timothy Grafstrom from WA. on 3/14/2020

Superb quality & performance

Trinity motors have been the "Go to choice" for quality & performance for a very long time and they just keep getting better!

Did you find this helpful?

Reviewed by: (Verified Buyer) Jason Burks from Spokane . on 4/21/2020

17.5 xfactor

Great motor

Did you find this helpful?